Description

1-1/4″ ID Black Split Loom Wire Conduit – 50 ft Roll (PIC-5146-B)

Keep your wiring harnesses protected, organised, and professional-looking with this 1-1/4-inch inner diameter black split loom conduit, supplied in a 50-foot roll. The longitudinal split allows the loom to be opened and wrapped around existing wire bundles without disconnecting any terminals — making it ideal for retrofitting protection to installed wiring on engine harnesses, helm stations, bilge pump circuits, and any other high-density wiring runs aboard your vessel.

Key Features

• 1-1/4″ (31.75 mm) inner diameter — accommodates large wire bundles and multi-conductor harnesses
• Longitudinal split allows installation over existing wiring without disconnecting terminals
• 50-foot (15.2 m) roll — sufficient for most full-vessel wiring protection projects
• Black UV-resistant polyethylene construction rated for engine bay, bilge, and above-deck use
• Flexible corrugated design conforms to bends and routing paths without kinking
• Protects wiring from abrasion, chafe, heat, and moisture
• Clean, professional appearance for helm station and engine bay installations

Sizing Guide

The 1-1/4″ ID size is suited to large wire bundles — typically 8 to 15 wires of 14–10 AWG, or 4 to 6 wires of heavier gauge. For smaller bundles, consider 1/2″, 3/4″, or 1″ ID split loom. Always measure your bundle diameter before selecting loom size.

Specifications

• SKU: PIC-5146-B
• Inner Diameter: 1-1/4″ (31.75 mm)
• Colour: Black
• Length: 50 ft (15.2 m)
• Material: UV-resistant polyethylene
• Type: Split loom wire conduit
• Estimated Weight: 0.55 kg

Note: This item is currently out of stock. Inventory tracking is suspended until further notice. Contact us to inquire about availability or lead times.