Description

Nylon Ring Terminal — 12–10 AWG, #8 Stud, 100-Pack

Terminate mid-gauge marine wiring at terminal strips, instrument panels, and small bus connections with this 100-pack of nylon-insulated ring terminals. Sized for 12–10 AWG wire and #8 studs — the smallest screw size in the 12–10 AWG ring terminal range — the 799955 is a high-volume, cost-effective termination solution for service shops and full vessel wiring projects where #8 screw connections are required.

Key Features

• Nylon Insulation — Tough, heat-resistant nylon barrel protects the crimp zone from abrasion, vibration, and incidental moisture contact
• 12–10 AWG Wire Range — Mid-gauge coverage for terminal strip connections, instrument panel feeds, bilge pump circuits, navigation light wiring, and moderate-current accessory runs
• #8 Stud Size — Fits #8 (0.164″) screws and studs on terminal strips, instrument panels, small bus bars, and light-duty distribution blocks
• Tinned Copper Barrel — Corrosion-resistant tinned copper crimp barrel ensures a low-resistance, durable connection in marine environments
• Closed-Ring Design — Ring cannot slip off the stud even if the screw loosens under vibration — the preferred terminal type for permanent marine panel installations
• 100-Pack Bulk Quantity — Ideal for service shops, full vessel rewires, or stocking a comprehensive onboard spares kit

Specifications

• Type: Ring terminal (lug)
• Insulation: Nylon
• Wire Gauge: 12–10 AWG
• Stud Size: #8 (0.164″)
• Barrel: Tinned copper
• Quantity: 100 per pack
• Application: Terminal strips, instrument panels, small bus bars, light-duty distribution blocks, panel accessory wiring
• SKU: 799955

12–10 AWG Nylon Ring Terminal — Complete Stud Size Range

• #8 stud — 100-pack — Terminal strips, instrument panels, small bus bars (this SKU — 799955)
• #10 stud — 100-pack — Terminal blocks, fuse holders, distribution strips (SKU 799963)
• 5/16″ stud — 100-pack — Solenoids, starters, battery isolators (SKU 799971)
• 3/8″ stud — 100-pack — Battery terminals, main bus bars (SKU 799998)

Always verify the stud size on your terminal block or component before ordering. The #8 stud is the smallest in this range — do not use where a larger stud size is specified.

Installation Notes

Strip wire to the correct length so the conductor fills the barrel without extending beyond it. Use a ratcheting crimper for consistent, gas-tight crimps — avoid plier-style crimpers. Torque the terminal strip screw to the manufacturer’s specification. Support the wire within 6″ of the terminal to reduce flex fatigue. Inspect terminals annually for corrosion or loosening and replace as needed.

The 799955 100-pack rounds out the 12–10 AWG nylon ring terminal stud size range — the right bulk supply for #8 screw terminal wiring in service shops and full panel installations.