Description

LALIZAS Manual Siphon Pump – 7/8″ (22.5mm) x 63″ (160cm) – Transparent

Heavy-duty manual siphon pump designed for transferring fuel, water, and other liquids on boats and marine applications. This 63-inch (160cm) transparent hose with 7/8-inch (22.5mm) diameter provides efficient liquid transfer without requiring electric power. The clear construction allows visual monitoring of fluid flow, while the durable materials resist fuel, oil, and saltwater exposure.

Specifications:

• Hose Diameter: 7/8 inch (22.5mm)
• Hose Length: 63 inches (160cm)
• Material: Transparent fuel-resistant plastic
• Weight: 0.709 kg (709 grams)
• Operation: Manual suction siphon
• SKU: 70003
• Barcode: 5204980700034

Key Features:

• Manual Operation – No electricity required, works anywhere on vessel
• Transparent Hose – Clear construction allows visual monitoring of fluid flow
• Fuel Resistant – Compatible with gasoline, diesel, and marine fuels
• 7/8″ Diameter – Large bore provides fast transfer rates
• 63″ Length – Adequate reach for most marine fuel and water transfer applications
• Durable Construction – Resists fuel, oil, and saltwater exposure
• Portable – Lightweight and easy to store when not in use

Applications:

• Fuel Transfer – Transfer gasoline or diesel between tanks and containers
• Water Transfer – Pump fresh water or bilge water
• Tank Draining – Empty fuel or water tanks for maintenance or winterization
• Emergency Fuel Transfer – Transfer fuel from one vessel to another in emergency situations
• Outboard Motor Tanks – Fill or drain portable outboard fuel tanks
• Generator Fueling – Transfer fuel to onboard generators
• Bilge Pumping – Manual backup for removing water from bilge

How to Use:

1. Insert Hose – Place one end of hose into source container (fuel tank, water tank, etc.)
2. Create Suction – Use manual suction method to start siphon flow
3. Monitor Flow – Watch through transparent hose to verify fluid is flowing
4. Direct Flow – Position outlet end into receiving container
5. Control Transfer – Raise or lower outlet end to control flow rate
6. Stop Flow – Raise outlet end above source level or remove hose to stop siphon

Safety Guidelines:

• Fuel Vapors – Use in well-ventilated areas when transferring fuel
• No Smoking – Keep away from open flames and sparks when handling fuel
• Proper Containers – Only transfer fuel into approved fuel containers
• Avoid Ingestion – Never use mouth suction with fuel – use proper siphon starting methods
• Spill Prevention – Have absorbent materials ready in case of spills
• Grounding – Ground containers when transferring fuel to prevent static discharge

Compatible Fluids:

• Gasoline – Regular and premium unleaded gasoline
• Diesel Fuel – Marine diesel and biodiesel blends
• Fresh Water – Potable and non-potable water
• Saltwater – Seawater for various applications
• Oils – Motor oil and lubricating oils
• Coolants – Engine coolant and antifreeze

Care & Maintenance:

• Rinse After Use – Flush hose with clean water after transferring fuel or oil
• Dry Completely – Allow hose to drain and dry before storage
• Inspect Regularly – Check for cracks, splits, or deterioration
• Store Properly – Coil loosely and store in cool, dry location away from direct sunlight
• Replace if Damaged – Replace hose if it becomes stiff, cracked, or shows signs of fuel degradation
• Avoid Kinking – Don’t store with sharp bends that could damage hose

Essential equipment for marine fuel and water transfer. The manual operation provides reliable liquid transfer without requiring electrical power, making it perfect for emergency situations or routine maintenance. Transparent construction allows visual monitoring of flow, while fuel-resistant materials ensure long-lasting performance in harsh marine environments.